The Nano IP Series adds Ethernet capability to the miniature,yet powerful Nano platform.This incredibly small Ethernet Bridge and Serial Gateway provides robust wireless communication of simultaneous serial data and IP/Ethernet packets to extend serial data and IP networks.
IPn Series Miniature OEM Wireless Ethernet/Serial/USB Gateway
Description
The Nano IP platform is the smallest form factor(2″x1.25″x.5″,weighing only 25 grams)available which offers a full Ethernet/Serial/USB bridge and routing functionality.The Nano IP OEM module can be directly integrated into OEM syatems or applications using a variety of interfce options.With the LAN out interface ready to wire directly to CAT5 cable OEMs can integrate this unit quickly and efficiently.The Nano IP Series also features flexible maintenance utilities,secure firewall features and network management facilities.Roubust Frequency Hopping with excellent receiver sensitivity and interaerence rejection allow forlon range,high speed communications.
Features of the Nano IP Series:
- Low Power Consumption
- Up to 1.2Mbps Wireless Link Rate*
- Master,Slave,Repeater operation in a single unit
- 2 Serial Com Ports, 1 USB Port,and 1 Ethernet Port
- Supports Point-to-Multipoint,Repeater,Peer-to-Peer
- Adjustable transmit power(100mW – 1W)
- Radius Server Support
- Full VLAN Support(for separate management and Data natworking)
- User interface through local console,telnet,and web browser
- Network management capability with SNMP V1,V2,V3
- Local and remote wireless firmware upgrading through FTP
- QoS Routing on Serial,IP,or Logic Ports
Miniature OEM Wireless Ethernet/Serial/USB Gateway
Specifications
Frequency | 902-928MHz (IPn920),310-390MHz (IPn320) 410-480MHz (IPn425),1.35-1.39GHz (IPn1350) |
Spread Method | Frequency Hopping/DTS |
Link Rate | Up to 1.2 Mbps(See Order Options) |
Error Detection | 32 bits of CRC,ARQ |
Encryption | 128-bit WEP/WPA(Canada & USA only.NOT AVAILABLE for export,see-AES option) |
Range | Up to 30+ miles(50+km)@1.2Mbps Up to 60+ miles(100+km)@172Mbps |
Sensitivity | -108dBm @ 172kbps link rate -106dBm @ 230kbps link rate -97dBm @ 1.2Mbps link rate |
Output Power | 100mW – 1W(20-30dBm) |
Serial Interface | RS232,RS485,RS422 |
Serial Baud Rate | 300bps to 921kbps |
USB | USB 2.0 USB Console Port USB to Serial Data Routing USB to Ethernet Data Routing |
Ethernet | 10/100 BaseT,Auto – MDI/X IEEE 802.3 |
Network Protocols | TCP,UDP,TCP/IP,TFTP,ARP,ICMP,DHCP,HTTP,HTTP*,SSH*,SNMP,FTP,DNS,Serial over IP,QoS(*Only availablein-AES) |
Operating Modes | Point-to-Point,Point-to-Multipoint,Store & Forward Repeater,Peer-to-Peer |
Management | Local Serial Port Console,Telnet,We-bUI,SNMP,FTP & Wireless Upgrade,RADIUS authentication,VLAN |
Diagnostics | Battery Voltage,Temperature,RSSI,and remote diagnostics |
Rejection | Excellent strong signal interference & rejection characteristics |
Input IP3 (Antenna Connector) | +12dBm |
Input Voltage | |
OEM | 3.3VCD Nominal(+/- 0.3V) 7-30 VDC 7-30 VDC |
Power Consumption(Typical with n920F @12V with Motherboard) | Sleep:<1mA Idle:35mA Rx:110mA to 145mA Tx:350mA to 500mA |
Connectors | |
OEM Antenna Data Enclosed Antenna Data | OEM-MMCX OEM-60 Pin OEM Header x2 RPSMA Female Bulkhead |
Environmental | |
Temperature Humidity | -40℃ to +85℃ 5-95%,non-condensing |
Weight(Including Radio) | |
OEM Enclosed w/Interface Board | Approx. 25 grams Approx. 250grams Approx. 70 0grams |
Dimensions | |
OEM Enclosed | Approx. 1.25” x 2.0″ x .50″ (32mm x 51mm x 13mm) Approx. 2.25” x 3.85″ x 1.50″ (57mm x 98mm x 38mm) |
Approvals | FCC Part 15.247 IC RSS210 |
Applications:
- IP/Ethernet Wireless Extension
- Legacy Networks/Devices Migration
- Video/Voice over IP
- SCADA(PLCs,Modbus,HART)
- GPS Vehicle Data/Tracking,DGPS
- GPS Vehicle Data/Tracking,DGPS
- Electric,Oil & Gas Utilities/Metering
Reviews
There are no reviews yet.